In perfect professional quality
- Combination insulation
- The bonded silicate facing permits interior surfaces to be plastered, painted, or wallpapered – an ideal solution where rafters are to remain visible
- Impact resistant, e.g. thrown balls
- For installation on the rafters
- With tear- and slip-resistant membrane
- Suitable as a temporary roof covering
- With integral vapour barrier
For PUR(E) energy saving
- Insulating core made of PU rigid foam
- λD 0.022 W/(mK)
- Positive building biology
Over-rafter insulation system - LINITHERM PAL SIL T
| Insulation core | PU rigid foam acc. to EN 13165, fire behavior class E acc. to EN 13501-1, coated with aluminum film on both sides |
| Facing | Upper side coated with tear- and slip-resistant membrane, approx. 8 cm overlap lengthwise and transverse, plus integrated factory made sealing band. Inner side with 6 mm thick silicate board (not burnable, resistant to moisture, can be painted, or wallpapered). |
| Edge joints | Tongue & groove pressfit joints on all sides, silicate board with drywall edge |
| Overall dimension | 2480 × 1180 mm (= calculation measurement) |
| λD (EN 13165) | 0.022 W/(mK) |
| Thickness mm total |
Thickness mm PU |
Thickness mm Silicate board |
U-value2) W/(m²K) |
| 66 | 60 | 6 | 0.34 |
1) Roof pitch as specified, and in accordance with the rules of the ZVDH (Central Association of German Roofers).
2) U-value, taking the thermal transfer resistance Rsi=0.1 [m²K/W] and Rse=0.1 [m²K/W] into account.
2) U-value, taking the thermal transfer resistance Rsi=0.1 [m²K/W] and Rse=0.1 [m²K/W] into account.
